Here for sale is the ultra rare 1972 Cadac G series console.

GENERAL DESCRIPTION: the console is equipped with 24 channels (G228 and G232),16 bus (12 loaded) G233, 16 monitor returns (12 loaded) G234, 2 foldback sends, 4 echo sends, with eq, and 8 fx returns with eq. The console is fully class A with no IC anywhere. It has 2 PSUs, one that runs at +24V for lights and switches, and one at +44V for the audio path. The high voltage (compared to any other console) gives an open sound with high dynamic range and low noise. All input transformers are Marinair /st.Ives 1444 and 1447, like on vintage Neve, one for line-in and one for mic-in. All the EQs are LCR (inductor based, like a Pultec), and all the console feature mastering grade Elma switches except the echo/foldback sends which are normal pots. Echo sends modules features a “Spin” control. This works as a feedback/repetition control in case you patch in a tape recorder and use it as a tape echo. The console is quadrophonic, so the monitors have 4 channel outputs through big Marinair output transformers. There is a right-hand B-gauge patch bay that hosts many remote-controlled relay switches, in order to shorten the signal path.

As far as we know, there are just four Cadac G with 228 modules in operation worldwide. Most of the G series in use are from a later period, equipped with gyrators instead of inductors, and having only one input transformer per channel instead of two.
The sound of this console can be described as warm and open, quite 3D if you will, with very flat frequency response, and low noise. Acustica Audio sampled this console to make the Cola plugin. You can try it to have a taste of how the eq sound. Here is the link. Also, here you can find a playlist (Tidal, Apple Music, Spotify) of recordings made using this console (record, mix, or both), including the Grammy-winning “Chernobyl OST” and multi-platinum album from “Kensington”, among others. In addition, this console was used to record two popular sample libraries from Spitfire: Ólafur Arnalds “Evolutions” and Hauschka “Composer Toolkit”

Included with the console is an Uptown 990 touch/moving fader automation complete with faders that fits the console (24 faders mounted on original black faceplates and 16 mounted on Neve branded faceplates of the same size), PSU, cards, and computer (with schematics and software). We never installed it, it was working when we acquired it, but never tested it.

DIMENSIONS:
Main console:
Height to fader: 73cm
Height to meter bridge: 100cm
Width: 251cm

Patch bay:
Length: 150cm
Width: 65cm

CONDITIONS: the console was acquired 10 years ago and has been going through a full restoration. Many modules have been recapped, switches have been cleaned with an ultrasound bath and replaced when necessary. Some of the modules have been recapped with original Philips/Vishay, and on others, we were trying Nichicon audio-grade BP caps to see if we prefer them. Input modules 23 and 24 are G268D, line and mic-in are working, however, the eq is partially working and needs some new gyrators. The wood parts of the console have been rebuilt following the original design. Please note that the Studer remote control and varispeed control are not included with the console and will be replaced by blank panels. Although being a vintage console, and some maintenance should be expected, it’s, by all means, a working console that produced many great records during the last 10 years.

ADDITIONAL FEATURES: there is an original power supply for the 44v which was partially recapped and working beautifully. The original 24v PSU, used only for powering lights and relays, was exchanged with a modern one. There is no 48v phantom power on the console, we prefer to use external phantom power in the recording room (also safer for ribbon microphones). The patch bay is connected to the main console via multipin connectors so it can be detached for transport. Lots of spare modules, from a 1976 G series version are included (see picture below) as well spares caps and parts. Original full schematics are included too. Also included, are two plexiglass modules that fit on top of the console for keyboard/mouse and monitor or scores.

The console is located in Berlin, Germany (13086). We are can ship it worldwide and arrange the best option with the buyer.

We accept only serious offers. Please write exclusively to sales@mjq.co.uk